KONFIGURASI CISCO

KONFIGURASI CISCO

Konfigurasi di R1

• masuk putty
• pilih serial isikan /dev/ttyUSB0 speed=9600 lalu open
• enter
• enable
• configure terminal
• hostname TKJ
• interface ethernet0
• ip address 192.168.30.2 255.255.255.224
• no shutdown
• ip nat outside
• exit
• interface serial0
• ip address 10.10.10.1 255.255.255.0
• no shutdown
• ip nat inside
• exit
• ip default-gateway 192.168.30.1
• ip name-server 192.168.30.1
• ip name-server 202.155.0.10
• ip name-server 202.155.0.15
• ip route 0.0.0.0 0.0.0.0 192.168.30.1
• ip route 10.10.11.0 255.255.255.0 10.10.10.2
• exit
• ping 192.168.30.2
• ping 10.10.10.1
• ping 192.168.30.1
• ping detik.com
• jika di ping semua berhasil maka konfigurasi telah sukses
• selesai

Konfigurasi di R2

• masuk putty
• pilih serial isikan /dev/ttyUSB0 speed=9600 lalu open
• enter
• enable
• configure terminal
• hostname SMK
• interface Serial1
• ip address 10.10.10.2 255.255.255.0
• no shutdown
• ip nat inside
• exit
• interface ethernet0
• ip address 10.10.11.1 255.255.255.0
• no shutdown
• ip nat inside
• exit
• ip default-gateway 10.10.10.1
• ip name-server 192.168.30.1
• ip name-server 10.10.10.1
• ip route 0.0.0.0 0.0.0.0 192.168.30.1
• ip route 192.168.30.0 255.255.255.224 10.10.10.1
• exit
• ping 10.10.10.2
• ping 10.10.10.1
• ping 192.168.30.2
• ping 192.168.30.1
• ping detik.com
• jika di ping semua berhasil maka konfigurasi telah sukses
• selesai